How to maintain the crusher bearing
Choosing the right crusher is very important for the normal operation of the work, and the biggest problem after the crusher starts to use is the daily maintenance. The maintenance in place will prolong the service life of the crusher and save the cost. Here I take everyone to understand how to maintain the crusher bearings.
If the wear of the bearing is seldom, just to repair its geometry, it can be turned on the lathe, so that the journal can reach the correct geometry, and then the bearing inner diameter can be reduced accordingly. However, after several such disposals, if the journal size is reduced by 5% from the original, no turning is allowed, and the new shaft should be replaced. No matter what kind of equipment, only the maintenance is good, the maintenance is good, and the service life will be increased. Just keep your crusher and you will not only increase the service life, but also save you a lot of money for changing the dimension.
Many customers use the crusher for a long time and are not well maintained. It is not until the problem arises that the crusher has to be repaired. This is a great loss to the machine. Many customers have asked how the crusher bearing housing should be cleaned. This is a mechanical maintenance problem. The mine crusher is cleaned with clean gasoline or kerosene. Jaw crushers are constantly being cleaned. When buying a crusher, Engineers will confess that after every use, they will be cleaned at regular intervals, which will extend the life of the crusher.
Jaw crusher must deal with the problem