Jaw crusher must deal with the problem
Jaw crusher common problems are presented during the work process, mainly due to wear and vibration, so look at what must be dealt with immediately.
Jaw crusher jaws and crusher machine surface contact is not smooth; eccentric shaft speed is too fast, once the broken material is too late to clean, resulting in crushing cavity inflation, jaw wear; material properties have changed, but the crusher did not do Timely adjustment; the angle between the movable jaw plate and the fixed jaw plate is too large and exceeds the normal range; the strength and wear resistance of the jaw plate are poor, and the impact resistance is not good; the method for handling the jaw plate wear of the jaw crusher : The newly installed sampan plates must be tightly fastened and mounted so that they are in constant contact with the machine's appearance. A layer of better plastic material can be placed between the jaws and the appearance of the machine; each batch of material entering the crusher should be stopped for sampling, and once the nature of the attack material has a major change, it is necessary to change the crusher in time. Parameters to match the incoming material.