Shandong Lianbang Heavy Industries Co., Ltd.

Tel

(86)13505398919

Powered by  www.300.cn 

Copyright © Shandong Lianbang Heavy Industries Co., Ltd.   |    鲁ICP备15012794号-1       

XS series

The sand washer has a simple structure and a reasonable structure. The impeller drive bearing device is isolated from the water and water receiving materials, a novel sealed structure,
Description
Specifications
Case
Pictures and videos

1, the large amount of processing, low production costs
2, multiple effects, high degree of cleanliness
3, simple structure, low failure rate
4, good structure layout, effective seal design, so that the machine can not use long-term maintenance, durable; low water consumption, low noise, in line with national environmental standards.

When the sand washing machine is working, the motor drives the impeller to rotate slowly through a V-belt, a speed reducer, and a gear deceleration. The gravel has a feed chute to enter the wash tank, and is tumbling under the impeller, and grinds each other to remove the surface of the covered sand. Impurities, while destroying the water vapor layer coating sand, in order to facilitate dehydration; At the same time, add water, form a strong water flow, promptly remove foreign matter with a small amount of impurities, and discharge from the overflow mouth washing tank to complete the cleaning effect. The clean gravel is carried away by the blades, and the gravel is poured from the rotating impeller into the discharge chute to complete the gravel cleaning.

Working principle

Processing materials: river pebbles, granite, basalt, quartz, iron ore, diabase, limestone, coal gangue, etc.
XS series sand washers, commonly known as bucket sand washers, are high-efficiency sand-washing equipment used by the Federal Heavy Industries Co., Ltd. using advanced technologies at home and abroad, combined with the actual conditions of the domestic sand and gravel industry.

 

Performance characteristics

Specifications Wheel diameter(mm) Rotating speed(r/min) Processing capacity(t/h) Power(kw) Weight(t)
XS2612 2600 0.8-1.2 20-50 5.5 2.4
XS2816 2800 0.8-1.2 50-100 7.5 3
XS3218 3200 0.8-1.2 80-120 11 11.4